How to Make Cloth Diaper Burp Cloths

I always thought using cloth diapers was the best thing for soaking up spit up, however it wasn't always attractive to have a burp cloth hanging off my shoulder. Adding a little bit of flannel to the center strip of a cloth diaper makes these both cute and functional. And have you checked out flannel lately? It has definitely come a long way from the little checks and baby bottle selection I used to see. Thank you for giving us options people!

If you are a beginning sewer, this is a perfect project for you! It's very simple.

You will need:

- a pack of cloth diapers (usually comes in a 10 pack).

- 20" by 6" of flannel per burp cloth.

- 40" of coordinating ribbon per burp cloth (you sew the ribbon on both sides of the flannel).
- coordinating thread.

Simply prewash and dry your diapers and flannel to prevent shrinking.

Looking at your diaper vertically, fold the outside edges in to meet the lines on the outside of the center padded part. Pin the edges in place, like so:Sew the folded part in place, along the inside vertical line, and on the top and bottom edges (to close the two pieces). This makes the outside edges thicker and more absorbent. Next, measure and cut your flannel, leaving 1/2 " extra on either end, to tuck underneath so you won't have a raw edge. Iron the 1/2" fold on both ends. Then pin the flannel in place with the top and bottom edges folded under, and sew around all four edges. (The side edges will be raw at this point, but you are going to cover them with ribbon!)Next, measure your ribbon, leaving 1/2" extra on both ends, iron it folded under so it stays while you sew (just like you did with the flannel), pin it in place, and sew it up and down either edge. Ric Rac Option: If you want to make a ric rac ribbon, you will sew the ric rac onto the ribbon first, and then fold the top and bottom edges under, pin in place, and sew up and down both sides of the ribbon to secure. Super Cute!A stack of burp cloths makes a great baby shower gift!